 
Founded in 1997, Analog Technologies, Inc. (ATI), specializes in the R&D and production of analog and digital electronic hardware modules, sub-systems, and systems. We have main product lines including: laser and LED drivers, TEC controllers, LED lights, SMT resistor/capacitor/inductor kits, etc.
Products include:
We have numerous kinds of laser drivers/controllers such as: high efficiency, dual mode, ultra low noise, high current CW, DC or AC input types, high current short pulsed, constant current controlled, constant power controlled, etc.
The TEC controllers made from ATI are designed to drive TECs (Thermo-Electric Coolers) with high efficiency and high temperature stability. The users of our TEC controllers will be provided analog interface ports to configure desired set-point temperatures, temperature ranges and current and/or voltage limits. At the same time, these TEC controllers allow users to monitor the actual working condition parameters of the system: target temperature, TEC voltage, TEC current, etc. Also, the controllers can be put at either shutdown or standby modes to save power. Under our patented technologies, these TEC drivers can achieve high power and high efficiency by occupying small space.
Our TEC modules, named Peltier devices, have lots of features such as high thermal efficiency, high reliability, longer lifetime and much lower cost. Most of these modules can be driven by our TEC drivers to achieve the accuracy and stability.
Our offer several high performance thermistors and thermistor assemblies which work well with our TEC controllers and TEC modules for building high stability low drift temperature control systems. These thermistors and thermistor assemblies are of high precision (+/-0.25C@25C), compact size (bare version), and glass coated, making them the best inter-changeable, sensitive, precise, and low drift temperature sensors for making high performance application systems. These sensors come in bare and lugged forms, the former is used for specific point sensing, the latter is for bulk area sensing applications and can be mounted easily.
ATI produces a series of LED products. The main features for these products are: energy saving of > 50%, and long life of > 60,000 hours.
LED Strip Lights: designed for home and office decoration and illumination.
LED T8 Tubes:drop-in replacements for the conventional T8 fluorescent tubes used in commercial and public buildings ubiquitously. They can cut your electricity bills by >75% and are almost maintenance-free. The illumination effects are much closer to natural sunlight and pay by themselves in < 2 years.
LED Bulbs:Our SILVERLED are the drop-in replacement LED bulbs for replacing the traditional incandescent bulbs found in the industrial 6v lanterns and railway lanterns.
One of these ultra bright and energy efficient LED bulbs runs off either a 4-cell battery array or a 6v lantern battery. The other can work with a 5V to 8.5V input voltage power supply and can be used in a 4-cell 6V rechargeable lead-acid battery lantern.
These LED bulbs can be easily installed and will extend the battery life by at least 5 times..
LED Power Supplies: 2.5A, 8.5A and 12.5A @ 12V. They are all UL approved and water resistant for safety, reliability and durability. They are of high efficiency > 85% and can accept a wide input voltage range from100VAC to 240VAC..
High Power LED's: high efficiency >90lm/W, high luminous output >90lm @ 1W and >160lm @ 2.5W, single high power LED, have different light emitting angles - 60°, 80°, 120°, 160°, and long lifetime > 50,000 hours, for illumination applications.
Our electronic engineering design kits include: surface mount resistor kits, surface mount capacitor kits, and surface mount inductor kits. Within one kit, it contains all the values: 510 values for the resistor kits, >80 values for the capacitor kits, >60 values for the inductor kits. In addition to the completeness of the values, they come at different sizes: 1206, 0805, 0603, and 0402. They save time for obtaining a tiny SMT part, save space for your work bench, and allow you to access and try any value of the components, the best choice for serious professionals to build and test prototyps, and do experiments. We have sold > 50K units world wide with zero returns. This video shows: How Our Super SMT Kits Work.
Our Super SMT Component Enclosure is deisgned to store small or surface mount parts, such as resistors, capacitors, inductors, ICs, mechanical parts, etc. This enclosure has 128 individually lidded compartments, each lid has a label area, that can be used for marking the component type or sticking a printed label sticker. All the lids are covered by one big cover, which presses down each lid onto its locking position so that the components inside will not leak out during transactions. This video shows: How It Works.
More Info »
|
