ATI provides a simple solution for storing, sorting and accessing SMT resistors for electronic engineers and professionals, that is, SMT resistor kit. This resistor kit measures only one letter size that is easy for users to carry and transport to any other places. There are totally 128 individually lidded compartments, that contains SMT resistors with different values and dimensions. Several options for values and dimensions can be chosen. The sizes of resistors can be 0402, 0603, 0805 and 1206...(more)
ATI develops and manufactures a series of ultra low noise laser diode driver, 104 series. ATLS1A104 is in this series with highest maximum output current, 1A. The noise is as low as 0.6 6A at 0.1Hz to 10Hz. This laser diode driver can output 0.5V to 3.6V when it is powered by a 5V power supply. It comes with many excellent functions, such as loop good indication, separate programmable output current and the limit, temperature monitoring inside the controller, etc. Besides, there is an over-heat...(more)
104 series ultra low noise laser diode drivers are used for driving laser diodes, such as DPSSL, EDFA, SOA, fiber laser, DSB diode lasers, etc. ATLS500MA104 is one of this series. As the part number shows, this laser driver comes with a 500mA low noise current. The output voltage of this laser driver is from 0.5V to 3.6V when it is powered by a 5V power supply. At 0.1Hz to 10Hz, this laser driver has a low noise, about 3.96A. Besides, this laser driver has other features like separate output cur...(more)
This TEC controller TEC28V15A comes with high voltage and high current, which is newly developed and manufactured by ATI. This high voltage TEC controller is used for driving high current TEC modules with high stability. Although this controller has high voltage and current, but it has a very small size that helps users save much space. The output voltage of this TEC controller is 28V and the output current can reach 15A. Moreover, it comes with a high efficiency, over 92%. There are many other...(more)
The ATH10KHN6 is a high stability and miniature ntc thermistor assembly with a threaded hex nut. This thermistor assembly can be used for detecting temperature and sensing, and air sensors, etc. This new ntc thermistor assembly has a wide temperature range, from 40C to 270C. The nominal resistance at 25C is 10k. This thermistor assembly comes with a small dimensions, which is shown in the picture below. The length of the threaded hex nut is 6mm+6mm, and the inner diameter of the threaded hex nut...(more)
The ATH10KHN4 is an ntc thermistor assembly with a threaded hex nut. This NTC thermistor has two copper coated leads. It is used for applications such as temperature sensing and detection, transformers, and air sensors, etc.. ATH10KHN4 thermistor assembly has many features such as long term stability, high reliability, compact size and short response time. Moreover, it can be used in a wide temperature range, from 40C to 270C. This ntc thermistor assembly has a high resistance accuracy, 1%. By u...(more)
ATCDB12 is an adjustable capacitor decade box that is designed and used for easy tuning of analog circuits. This box comes with a compact size that is suitable for laboratory experiments. Electronic engineers can tune it to a desired capacitance value. This adjustable capacitor decade box has a wide adjustable range, from 1pF to 100F, and the adjustment resolution is 1pF. This decade box also has a high accuracy, 5%. The adjustment ranges are: 1pF to 9pF; 10pF to 90pF; 100pF to 900pF; 1nF to 9nF...(more)
ATRDB12 is an adjustable resistor decade box, which is used for tuning analog circuits or doing experiments. It comes with accurate knobs for dialing to different resistances. Its comfortable to use it and users can read the total value easily. This box has a compact size that saves much space for most of applications. This adjustable resistor decade box has a wide adjustable range, and there are eight decades, from 0.36 to 9M, i.e., 0.1Ω ~ 0.9Ω; 1Ω ~ 9Ω; 10Ω ~ 90Ω; 100Ω ~ 900Ω;...(more)
