ATEC24V10A1is a
Peltier controller with high output voltage (24V) and high output current (10A), as shown in Figure 1. ATEC24V10A1Peltier controller is designed and produced to drive high power
TECs (
thermo-electric coolers). It has high efficiency(more than 98%) and high temperature stability (±0.01°C). This Peltier controller has a wide input voltage range, so based on the voltage signal, it can set the output current limit and the set-point temperature that can be programmed externally.
Figure 1. The physical photo of an actual ATEC24V10A1Peltier controller
The ATEC24V10A1 Peltier controller comes with a switch mode output stage. The switching frequency of thisPeltier controller can synchronize with external signal in order to eliminate any possible beating noise on power supply rails. There is a compensation network inside, which helpsachieve high temperature stability and highresponse speed. As the Peltier controller is packaged in a metal enclosure, it can avoid the interferences between the controller and other electronics.
If you want to know more about Peltier controller, please feel free to contact us.
