The
ATH100KL2A is a capped ntc thermistor encapsulated with glass and packaged in a compact ring lug. This thermistor series consist of ATH100KL2A, ATH100KL2AT63 and ATH100KL2AT63S. The ATH100KL2A has two leads coated with copper, the ATH100KL2AT63S has the two leads covered with plastic tubing and sealed by epoxy for insulation and liquid resistant, while the ATH100KL2AT63 is the non-sealed version. ATH100KL2A series thermistors feature better long term stability, higher reliability and wider temperature range when compared with conventional thermistor assemblies containing epoxy encapsulated thermistors inside.
The main parameters are shown in the table below.
|
Parameter |
Value |
|
Nominal Resistance@ 25°C |
100K ± 1% |
|
b Value @ 25°C/85°C |
4066K ± 1% |
|
b Value @ 0°C/100°C |
4036K ± 1% |
|
b Value @ 25°C/100°C |
4085K ± 1% |
|
Ring Lug Length |
8.1 ± 0.1mm |
|
Ring Lug Width |
3.6 ± 0.1mm |
|
Ring Hole Diameter |
2.4 ± 0.1mm |
|
Lead Diameter |
0.15mm |
|
Lead Length |
60 ± 3mm |
|
Thermal Time Constant |
2.39s (in still air)
1s (in water) |
Physical photo of ntc thermistor ATH100KL2A
For more information about this ntc thermistor series, please refer to the webpage:
For more information about other ntc thermistors, please visit our website:
