TEC module is short for Peltier Cooler Module, which can heat up or cool down the target object by inserting currents of different directions. For standard TEC modules, when they shifts from heating to cooling or cooling to heating, the modules are exposed to large physical stresses, which will largely reduce the operational life of TECs.
ATE1-TC-71 TEC module is designed for temperature cycling applications. When this TEC module suffers thermal cycling, the service life will not be reduced, and is longer than standard TEC modules. There are two products in this TEC module series, ATE1-TC-71-5R5AS and ATE1-TC-71-7R8AS. The maximum input voltage is 9V, and the temperature difference of the former is 74.5°C, and the latter is 72.5°C. Both of the two TEC modules are sealed version, which refers to the sealing between the edges of the two ceramic plates of the TEC modules.
TEC modules can be controlled by our TEC controllers, please visit this page for more information:
http://www.analogtechnologies.com/tec-controller.html
ATI provides more thermal cycling TEC modules and standard TEC modules, for more technical data of TEC modules, please visit our webpage and datasheet:
http://www.analogtechnologies.com/tec-module.html
For more products of thermal system, please visit:
http://www.analogtechnologies.com/thermal_system_components.html
