In the previous two articles, NTC thermistor series ATH10KBL2A and ATH10KL2B have been introduced already. In this article, we will focus on ATH10KL2C series NTC thermistors. This NTC thermistor is also packaged in a small ring lug for easy mounting. Inside the ring lug, there is a thermistor head, ATH10K1R25, which is also in ATH10KL2B NTC thermistors. Therefore, the three thermistors have the same characteristics.
The length of the ring lug of ATH10KL2C series thermistors is 11.2mm, and the width is 5.5mm. The length of the lead wires of this series NTC thermistors is 70mm. Therefore, the three versions come with the part numbers, ATH10KL2C, ATH10KL2CT70 and ATH10KL2CT70S. 70 refers to the length. As mentioned in the last two articles, ATH10KL2CT70 and ATH10KL2CT70S have plastic tubing covered with the lead wires and the latter is the sealed version.
NTC thermistor can work with TEC module and heat sink in order to measure and control temperature in some systems.
For technical data of this NTC thermistor series, please refer to:
http://www.analogtechnologies.com/ath10kl2c.html
For more types of low drift NTC thermistors, please visit:
http://www.analogtechnologies.com/thermistor.html
For more and various types of electronic products, please visit our homepage at:
http://www.analogtechnologies.com/
