TEC Controller is also called Peltier controller, which is used for driving Peltier coolers in order to regulate the object temperature. This Peltier controller TECA1-xV-xV-DAH is one of ATIs TEC controllers, which has high accuracy and high stability. This TEC controller comes with high efficiency, higher than 90%. The stability is as high as 0.004C. It has a higher accuracy compared with our current TEC controller, TECA1-xV-xV-D. The main difference lies in the maximum voltage difference betwe...(more)
TEC Controller is also called Peltier controller, which is used for driving Peltier coolers in order to regulate the object temperature. This Peltier controller TECA1-xV-xV-DAH is one of ATIs TEC controllers, which has high accuracy and high stability. This TEC controller comes with high efficiency, higher than 90%. The stability is as high as 0.004C. It has a higher accuracy compared with our current TEC controller, TECA1-xV-xV-D. The main difference lies in the maximum voltage difference betwe...(more)
ATH100KL2C series is special thermistor assembly that is widely used in temperature sensing applications. The thermistor head inside the ring lug is a glass encapsulated ntc thermistor, the resistance of which changes with the temperature. This thermistor assembly comes with a wide temperature range, i.e. from 40C to 270C. The ring lug is easy for mounting. The nominal resistance of this thermistor assembly is the same as ATH100K1R25, 100k and the accuracy is 1%. The diameter of the ring lug hol...(more)
Ntc thermistors have been widely used in temperature sensing applications these days. ATH100KL2B is an ntc thermistor assembly that has a glass encapsulated ntc thermistor inside the ring lug. The ring lug is used for mounting to another object easily. The internal glass encapsulated thermistor is ATH100K1R25, with the nominal resistance at 25C of 100k. The ring lug outside it has a ring hole diameter of 2.18mm. If you are looking for a larger ring hole diameter, then ATH100KL2C may meet the req...(more)
Thermoelectric cooler series ATE1-288 has a largest maximum input voltage, 35V, which allows a maximum current getting through the TEC modules from 6A to 20A. This series TEC modules are all sealed between the two ceramic plates, which extends the service life of the TEC modules by preventing moisture from getting into the inner part of the TEC modules. For this series TEC modules, the maximum temperature difference it can attain is 68C. Different current options result in different power rating...(more)
ATE1-241 series thermoelectric coolers have a relatively high maximum input voltage, 28.9V, with 241 pairs of Peltier element, thus it can also be called Peltier cooler, or TEC module. This series TEC modules have different options for current value, thus different power ratings. The current value can be 6A, 8A or 10A. The maximum temperature difference is 68C. All the TEC modules in this series have sealed edges, so that moisture cannot enter into the Peltier elements of the TEC modules, which...(more)
With 161 pairs of Peltier elements, ATE1-161 series thermoelectric coolers come with a maximum input voltage of 19.3V. This TEC modules is aimed to regulate and stabilize the temperature in a wide range, and it can be used in air conditioner, IC, solid state laser, icebox, etc. This TEC module has two bare and flat ceramic plates, which can be mounted onto flat metal surfaces by inserting thermal conductive materials, such as thermal pad or thermal paste. Compared to other types of cooler, this...(more)
ATLS6A214 laser driver comes with high voltage, constant current, and high efficiency. The efficiency can reach over 90%, so there is no need for heat sink. It also has a compact size, 27.4*21*5.7mm, which saves valuable PCB space in laser applications. The input voltage range is from 5V to 14V, and the maximum output current is 6A, as indicated in the part number, ATLS6A214. This high voltage laser diode driver can drive multiple laser diodes with high efficiency at the same time. The output cu...(more)
