Thermoelectic cooler can also be called Peltier cooler or TEC module, which are often used for regulating the temperature of objects in applications such as solid state lasers, optical components, etc. This Peltier cooler ATE1-18 has two metalized surfaces on both the hot and cold side, which can be easily soldered. This TEC module has 18 Peltier elements with a maximum input voltage of 2.3V. This series of TEC modules have a wide temperature range, from 60C to 200C. There are two models in this...(more)
ATFLD1W830 is a fiber coupled laser diode module, which is designed and used in printing, medical laser treatment, and many other applications. This laser diode module can output 1W power with 830nm center wavelength. Through special micro optics, this laser diode module can transform asymmetric radiation from laser diode chip into the fiber with small core diameter. The recommended case temperature is 25C. The temperature coefficient of wavelength is 0.3nm/C. The typical threshold current is 18...(more)
SMT inductor kits are designed and used for easy access to SMT inductors. These SMT inductors are stored and presorted in a component enclosure, which is designed and manufactured by ATI. The component enclosure comes with 128 lidded coverlets and a final top cover. The enclosure has an A4 paper size and can be carried with users easily by placing it into a bag. During transportation, the components inside the enclosure would not be leaked out since a foam pad inside the top cover will keep all...(more)
SMT resistors are widely used in electronic fields nowadays, and how to store and sort them up is not easy for most of electronic engineers. ATI provides a simple solution with the invention of SMT resistor kits. SMT resistor kits contains a certain number of resistors that are well sorted and arranged in the compartments inside the kits. The kits can be carried with the users conveniently since it has a size of an A4 paper. As shown in the photo below, the resistor kit has 128 individual compar...(more)
ATFC106D digital TEC controller assembly is the updated version of the old ATFC105D, which has stopped production now. As shown in the photo below, there is a LED display and a panel for operation. In this panel, you can set different parameters and monitor different status by the LED indication. This controller assembly consists of a digital display, a TEC controller, a fan controller, and temperature controlled relay control output. Its recommended to use this TEC controller assembly with heat...(more)
TEC module is also called thermoelectric cooler or Peltier cooler, which can generate heating or cooling thermal power when an electric DC current is applied at different directions. Current direction determines heating and cooling. There are two ceramic plates on both sides of TEC module, and when the current flows in one direction, one plate is heated up while the other one is cooled down. When the current direction reverses, the two plates will reverse thermal polarity accordingly. TEC module...(more)
TEC controller TEC5V6A-D is designed to drive thermoelectric cooler, which is also called TEC module or Peltier cooler. TEC module can heat up or cool down target objects by applying currents of different direction, and has been widely used in temperature related applications. As the controller to TEC modules, TEC controller should has high efficiency and high stability. TEC5V6A-D is a good option. The maximum output current of this TEC controller is 6A, and the maximum output voltage is power s...(more)
TECA1-xV-xV-DAH TEC controller is designed and applied for driving Peltier coolers with high stability. This TEC controller is the updated version of TECA1-xV-xV-D, since it has a higher precision. The most important feature of this TEC controller is that the maximum voltage difference between the TEMP pin and TEMPSP pin is 0.5, while for TECA1-xV-xV-D, this maximum voltage difference is 25, 500 times higher than the former one. Besides this, other features of this TEC controller are similar to...(more)
