ATH10K1R0 is a glass encapsulated NTC thermistor . It can be widely used in temperature measurement and control system, where high temperature sensitivity, long term stability, and high temperature sensing are required. Compared with traditional epoxy encapsulated NTC thermistors, ATH10K1R0 comes with smaller size (: 1.0mm1.4mm), quicker response time (4s in still air), better long term stability (0.1C/Y), and wider temperature range (-55C to 250C). The two leads of this thermistor is covered wi...(more)
ATW3A314 is a kind of energy saving Peltier controller , which is designed to drive thermal electric coolers ( TECs ) and regulate the temperature. This Peltier controller features thatit can save energy a lot by using battery power supply. And the controller is packaged in a metal enclosure, so it can block the interferences from other electronics. The following is the photo of the ATW3A314Peltier controller. Figure 1. Physical photo of the ATW3A314 Peltier controller Through the ATW3A314, it i...(more)
ATI provides an easy solution for electronic designers in collecting and organizing surface mount inductors, that is SMT Inductor Kits . There aredifferent types of inductor kits that contain different inductors of commonly used values with different quantities. The inductor kits are easy for users toobtain any value of inductors in the shortest time with the highest efficiency. The inductor kits come with128 individual compartments, each of whichcontains a certain amount of inductors of a certa...(more)
Thermal electric coolers ( TECs ) play an important role in thermal cycling applications, including instrumentation, PCR devices, thermal cyclers, etc. TEC can both heat and cool, depending on the current direction. In order to make TEC regulate temperature more stably and reliably, the Peltier controller is designed and released by our company ( ATI ). Figure 1. The physical photo of a Peltier controller There are many kinds of Peltier controllers in our company, which feature compact size, hig...(more)
This article is from Photonics Magazine. TEC controller design experts from Analog Tehcnologies, Inc offer tips to lower the cost and simplify the design of the devices, and to increase their ease of use. Thermoelectric cooler (TEC) control...(more)
The TEC5V6A-D is an advanced Peltier controller with the power supply voltage from 4.75V to 6V and the maximum output current 6A. It is used for driving thermal electric coolers ( TECs ) to monitor and regulate the temperature. This Peltiercontroller provides DIP packaging. It is very easy to be soldered manually on the board by a solder iron of 310 C, but it cannot go through a reflow oven process. Figure 1. The TEC5V6A Peltier controller The TEC5V6A Peltier controller (see Figure 1) comes with...(more)
The ATFC107D is a digital Peltier controller , which is designed to monitor and regulate the temperature of TEC /Fan assembles. When using the digital Peltier controller, there is no need of heat sinks, so it is convenient to use, carry and store. And the ATFC107D (see Figure 1) is packaged in a metal enclosure and keep from the interferences between the controller and other electronics. Figure 1. The photo of Peltiercontroller ThisPeltier controller provides many functions: setting the desired...(more)
Peltier controller is a thermal electric device, which is used to drive thermal electric coolers ( TECs ). The Peltier controller is packaged in a compact metal enclosure (see figure 1), which keeps it user-friendly. And the packaging method can also block the interferences from other electronics. Figure 1. The physical photo of a Pletier controller There are many kinds of Peltier controllers in ATI with high stability, high reliability and high efficiency. These Peltier controllers have differe...(more)
