Similar to ATH10KL2A and ATH10KL2C, ATH10KL2B is also a ntc thermistor assembly packaged in a ring lug. The inner ntc thermistor head is ATH10K1R25, thus, they have similar characteristics, while ATH10KL2B is for easy mounting. The ntc thermistor head is encapsulated with glass, so it presents long term stability and reliability, and wide temp. range. The ring hole diameter is only 2.18mm, and the length of the two leads is 70mm. The ring size is smaller than the ATH10KL2C, which can be applied...(more)
With the development of technology and science, thermal electric coolers ( TECs ) have been more and more popular in cooling system. TECs can cool and heat in the same time, depending on the direction of the input current. TECs have many advantages of no moving parts, no noise, no pollution and long service lifetime. These are the reason why TECs have been widely used in cooling system. In order to keep the temperature stable when using TECs, our company ( ATI ) has designed and released a Pelti...(more)
The ATH10KL2C is a thermistor assembly with a ring lug outside the glass encapsulated ntc thermistor. The ATH10KL2C series thermistor consists of three types, ATH10KL2C, ATH10KL2CT70 and ATH10KL2CT70S. The ATH10KL2C comes with two leads coated with copper, the ATH10KL2CT70 has the copper leads with high temperature plastic tubing and also sealed by epoxy, while the ATH10KL2CT70S is the sealed version of ATH10KL2CT70. The different types are applied to different applications. The sealed version i...(more)
The ATH100KL2A is a capped ntc thermistor encapsulated with glass and packaged in a compact ring lug. This thermistor series consist of ATH100KL2A, ATH100KL2AT63 and ATH100KL2AT63S. The ATH100KL2A has two leads coated with copper, the ATH100KL2AT63S has the two leads covered with plastic tubing and sealed by epoxy for insulation and liquid resistant, while the ATH100KL2AT63 is the non-sealed version. ATH100KL2A series thermistors feature better long term stability, higher reliability and wider t...(more)
ATH100K1R25 series ntc thermistors are high precision glass encapsulated thermistors with long term stability. Comparing with conventional epoxy encapsulated thermistors, ATH100K1R25 has a wider temperature range, especially on the high end applications, better long term stability, smaller size, and a shorter response time. Besides the bare leads, we provide two insulation versions. One is with the two leads covered by plastic tubing, and the part number is ATH100K1R25T70, and the other one, the...(more)
With the development of science and technology, thermal electric coolers (TECs) have become more and more popular in cooling systems. TECs can both heat and cool at the same time, depending on the direction of the input current. And TECs have many advantages of no pollution, no noise, no wearing, a long life time, and high reliability, etc. In order to keepthe temperature stable when using TECs, our company (ATI) has designed and released a Peltier controller, which has many adjustable parameter...(more)
Continued from the last article As shown in Figure 1, TECA1-5V-2.5V-D is a typical Peltier controller of ATI ( Analog Technologies, Inc. ). This Peltier controller has an input voltage of 5V and the maximum output voltage of 2.5V. And the Peltier controller is packaged in a metal enclosure, which helps to block the interferences between the controller and other electronics. Figure 1. The photo of a Peltier controller There are many interface ports on the Peltier controller, which users can use t...(more)
ATH10K1R25 series ntc thermistors are glass encapsulated thermistors with high stability and high precision that are popularly applied in temperature sensing for laser diodes, optical components, industrial process control, etc. All of these applications require high temperature sensitivity, long term stability, and/or high sensing temperature. The main parameters are shown in the table below. Parameter Value Nominal Resistance@ 25C 10K 1% b Value @ 25C/50C 3950K 1% b Value @ 25C/85C 3990K 1% R@...(more)
