TEC5V4A-D is a kind of Peltier controller , which is used to monitor and regulate the object temperature. The maximum output current of Peltier controller TEC5V4A- D is 4A and the maximum output voltage is 4.7V. This Peltier controller has high efficiency and high reliability. Peltier controller provides two packaging methods, DIP package and SMT package. The following is the physical photo of Peltier controller TEC5V4A-D. Figure 1. The photo of Peltier controller TEC5V4A-D There are many interf...(more)
Peltier controller is an independent research and development product of ATI , which is designed for drivingthermoelectric coolers ( TECs ) to regulate the object temperature. Peltier controller has many good characteristics, such as high energy efficiency, high stability, high accuracy, compact size, etc. As shown in Figure 1, this Peltier controller packaged in a six sided metal enclosure has zero EMI to avoid the interference with other electronics. Peltier controller can realize such functio...(more)
For various electronic SMT components such as inductors, resistors and capacitors, a proper kit for collecting them is very practical and important. ATI researched and developed a SMT component kit about 20 years ago, which are still protected by USPTO for its patent. The designer is a professional electronic engineer, who found it difficult and inconvenient to arrange and collect different SMT components on the workbench before the kit was invented. These components are essential for basic elec...(more)
ATH10KL2B is a NTC thermistor with an extra small ring lug that is used for easy fixing. There is a glass encapsulated NTC thermistor ATH10K1R25 with high stability and accuracy inside the ring lug. Glass encapsulated thermistor presents better long term stability and reliability, and has a wider temperature range. ATI provides another two types of this NTC thermistor for different applications, ATH10KL2BT70 and ATH10KL2BT70S. The former has two leads covered with plastic tubing but non-sealed,...(more)
ATH10K1R0 is a NTC thermistor with thermistor head encapsulated with glass instead of epoxy. Glass encapsulated NTC thermistor presents better long term stability, more compact size, shorter response time, and a wider temperature range. This NTC thermistor has two leads covered with high temperature plastic tubing and gets sealed between thermistor head and two leads, which can prevent the thermistor from being corroded in the liquid. The covered leads can prevent them from shorting from each ot...(more)
TEC5V4A-D is a high efficiency Peltier controller , which is designed and produced by ATI . TEC5V4A-DPeltier controller comes with many interface ports that can be used to set the required object temperature and the maximum output voltage. This Peltier controller has high efficiency, high accuracy, high reliability, etc. Because of the above advantages, TEC5V4A-DPeltier controller has been widely utilized to drive TEC ( thermoelectric cooler ). The following is the photo of TEC5V4A-DPeltier cont...(more)
The ATH100K1R25 is a high precision and glass encapsulated NTC thermistor with high stability. This NTC thermistor can be applied for temperature sensing for laser diodes, optical components, temperature control system, industrial process control, etc. All these applications require high temperature sensitivity, long term stability, and/or high sensing temperature. This NTC thermistor is the same as ATH10K1R25 on its size and dimension. The thermistor head is 1.25mm2.0mm. The length of its two l...(more)
TECA1-XV-XV-D is a kind of Peltier controllers , which is an electronic module with an output current up to 2.5A. This Peltier controller has high efficiency (more than 90%), high stability, high reliability and compact size, so it can meet variousdemands of driving thermoelectric cooler ( TEC ). TECA1-XV-XV-DPeltier controller is 100% lead (pb)-free and RoSHcompliant. Figure 1 is the physical photo of TECA1-XV-XV-DPeltier controller.TECA1-XV-XV-D is packaged in six sided metal enclosure, which...(more)
