For NTC thermistor , when temperature rises, the resistance decreases exponentially. Mix, mold and sinter two or more metal oxides, manganese, copper, silicon, cobalt, iron, nickel and zinc to produce NTC thermistor. The resistivity and material constants vary with the composition ratio, the sintering temperature, the sintering temperature and the structural state. Now, there are some non-oxide NTC thermistor, such as silicon carbide, stannic selenide, and tantalum nitride. NTC thermal semi cond...(more)
NTC thermistor is a common temperature sensor in our life, which is popularly used in automobile, home appliance, and other fields. NTC is the abbreviation of Negative Temperature Coefficient, which refers to semiconductor material or components with a large negative temperature coefficient. NTC thermistor is the thermistor with negative temperature coefficient. The NTC thermistor has manganese, cobalt, nickel, copper and other metal oxides as its main materials, which go through ceramic process...(more)
An inductor is a passive electronic component, which is an important part in present electronic design. The inductor stores energy in the form of a magnetic field. SMT inductor is a very tiny component, which its not easy to store and keep. SMT Inductor kits , designed and produced by ATI, provides a solution for storing surface mount inductors. There are various values and quantities of inductors in the inductor kits, and all the inductors are from renowned inductor manufacturer, such as TDK, V...(more)
Based on thermoelectric cooler (TEC), Peltier controller (TEC controller) is designed by ATI (Analog Technologies, Inc.). Peltier controller released by ATI has compact size, high stability, high reliability, high accuracy, long service lifetime, etc. It is 100 % lead (Pb)-free and RoHS compliant. There are many kinds of Peltier controllers in our company, TECA1-XV-XV-D series, ATEC24V10A-D series, ATEC24V10A series and so on. The following is the Physical photo of Peltier controller. Figure 1....(more)
SMT Inductor kits are designed and produced by Analog Technologies, Inc. It has been sold in US and overseas market for over 20 years with nearly 100% good feedback. This inductor kit has been improved in some aspects such as compartment lid. The original inductor kit has square compartment lids and doesnt leak large-size components, such as 1206 or larger, but would leak small size parts; the improved one has round lids and doesnt leak components even down to 0402. There is one top cover that h...(more)
Thermoelectric cooler ( TEC) is solid thermoelectric effect. Comparing with traditional cooling method, TEC has obvious different features, simple structure, no moving parts, no vibration, no wear, high reliability, long service lifetime, etc. Whats more, TEC starts fast and it is flexible to control TEC. The following is the physical photo of TEC. Figure 1. The photo of TEC Based on TEC, Peltier controller is built to control temperature, as shown in Figure 2. Because of compact size, there is...(more)
Peltier controller is an electronic module which is designed for regulating the thermal load temperature. By using a Peltier module, the temperature of the thermal load can be increased or decreased, which depends on the current direction going through the two terminals of the TEC. Peltier controller can regulate the temperature of the thermal load with high efficiency and accuracy. Here is a popular Peltier controller in US and global market, TEC5V6A-D. This Peltier controller comes with a 90%...(more)
For a temperature regulating system, NTC thermistor is very important as the temperature sensor. Glass encapsulated thermistor has better performance than epoxy coated thermistor, such as zero short and long term drift, which is an important factor in order to achieve high system performance. Low cost epoxy coated NTC thermistor have large short and long term resistance drift, so when sensing the same temperature, the resistance changes with time, it will lead to a wrong sensed temperature, resu...(more)
