NTC（Negative Temperature Coefficient）is a kind of thermistors. With the increase of temperature, the resistance of NTC thermistor will decrease exponentially. The following photo is a kind of NTC thermistors. Figure 1.The photo of NTC thermistor The development of NTC thermistor has a long history. In 1834, the characteristic of negative temperature coefficient of silver sulfide was discovered for the first time. In 1930, scientists found that Cu2O-CuO also has a negative temperature coeffic...(more)
Super SMT component enclosure is a US-patented product, which was designed and produced by Analog Technolog y in 1997. Although this enclosure was put into market in 1998, it is still very popular among electronic designers today. The physical photo of super kit enclosure is shown in Figure 1. Figure 1. The photo of super SMT component enclosure There are three series SMT component enclosures, namely, resistor kits , inductor kits and capacitor kits . There are 128 small compartments inside, and...(more)
Our company ( ATI ) has many kinds of high stability miniature thermistors , which can be used for temperature control of TEC controller , as shown in Figure 1. Thermistors produced by us have high reliability, high resistance accuracy, long service lifetime and some other advantages. Figure 1. The photo of miniature thermistor ATH10K1R25 series thermistor is a product of our company, which can be used to sense the temperatures for laser diodes, optical components and so on. When temperature is...(more)
AAS20A5V is a kind of high efficiency AC input 20A 5V laser driver, which is used to drive 0~20A laser diode. 0~20A output current can be set by setting 0~2.5V analog voltage. It has been widely used for driving fiber diode, diode laser rod and so on. The physical figure of AAS20A5V laser driver is shown in Figure 1. Figure 1. Three-D view of the AAS20A5V laser driver There are over temperature protection and short circuit protection inside. When the inside temperature exceeds the limit 90C, the...(more)
ATH100K1R25 series thermistors have three versions, ATH100K1R25, ATH100K1R25T70 and ATH100K1R25T70S. ATH100K1R25 has two bare leads; ATH100K1R25T70 has two leads covered with high temperature plastic tubing, non-sealed; and ATH100K1R25T70S comes with leads covered with plastic tubing, sealed. This series thermistor is glass encapsulated, and can be applied to sensing temperature for laser diodes and optical components, etc. The thermistor has a compact size: 1.25mm2.0mm. The length of the two le...(more)
AAS40A3.5V is a kind of laser power supply, which is designed for driving 0~40A laser diodes. It can set 0~40A output current by setting 0~2.5V analog voltage. There are short circuit and over temperature protection circuit inside. This laser power supply has high efficiency, more than 76%. It saves energy and has low temperature rise. The physical photo of AAS40A3.5V laser power supply is shown in Figure 1. Figure 1. The physical photo of AAS40A3.5V laser power supply AAS40A3.5V2 laser driver c...(more)
ATH100KL2A is a kind of glass encapsulated thermistors and it comes with an extra compact ring lug, as shown in Figure 1. When comparing with traditional epoxy encapsulated thermistor , this thermistor can provide higher long-term stability and a wider range of temperature. Whats more, it has compact size, short responding time and some other advantages. This thermistor can be utilized to measure the temperature of laser diode and optical elements with high accuracy and long-term stability. Figu...(more)
ATH10KR8B is a newly developed NTC thermistor of our company, Analog Technologies, Inc. This thermistor is the replaced version of our ATH10KR8, which has stopped production. ATH10KR8B series thermistors can be applied for temperature sensing for laser diodes, optical components, etc. This thermistor is glass encapsulated with high accuracy and high stability. The resistance accuracy is up to 1%. It comes with very short response time. Similar to ATH10KR8, ATH10KR8B series also has three version...(more)
