High Precision TECA1-xV-xV-DAH Peltier Controller

Peltier controller TECA1-xV-xV-DAH is the updated version for the TEC controller  TECA1-xV-xV-D. This Peltier controller has a higher precision, as shown in the table below. The TEC controller is also called Peltier controller, which is used for driving thermoelectric coolers in regulating temperatures in temperature control and measurement system.

Part #	Maximum |VTEMP − VTEMPSP | (mV)
TECA1-xV-xV-DAH	≤0.5
TECA1-xV-xV-D	≤25

This Peltier controller comes with a compact size, which saves much space for the system. It also provides multiple interface ports for setting the desired target temperature, i.e. maximum output voltage across TEC, set-point temperature; and the compensation network. The last one compensates the high order thermal load, stabilizing the temperature control loop.

The maximum output current is 2.5A and the stability is up to 0.004C. There is a high stability low noise 3.0V voltage reference that is used for setting the desired target temperature by using a POT or a DAC. Moreover, this reference can also be used by an ADC.  

This Peltier controller can work with our Peltier module, thermistor, and heat sink, to form a temperature control system. 

For more technical data of this TEC controller, please visit our website at:

http://www.analogtechnologies.com/TECA1-xV-xV-DAH.html

For more types of Peltier controllers, please visit us at:

http://www.analogtechnologies.com/tec-controller.html