NTC thermistors ATH10KR8B is the replacement for a similar NTC thermistor ATH10KR8 that has stopped production. This NTC thermistor is glass encapsulated, which has longer term stability and reliability than epoxy encapsulated NTC thermistors. The resistance accuracy is 1% and the thermistors have a short response time, 0.14s in the water and 2s to2.2s in still air at 5~25°C.
This series NTC thermistors have very compact size, 0.8mm*1.4mm, which can be used in application with limited space. There are three versions in this series NTC thermistors, ATH10KR8B , ATH10KR8BT65, and ATH10KR8BT65S. The first version NTC thermistor comes with bare copper coated leads; the second one has the leads covered with high temperature plastic tubing and the third one is the sealed version of the second one. The sealed NTC thermistors can be applied in non-corrosive liquid applications. The photo below is ATH10KR8BT65 NTC thermistor.
NTC thermistor can work with TEC module and heat sink in order to measure and control temperature in some systems.
For technical data of this NTC thermistor series, please refer to:
http://www.analogtechnologies.com/ath10kr8b.html
For more types of low drift NTC thermistors, please visit:
http://www.analogtechnologies.com/thermistor.html
For more and various types of electronic products, please visit our homepage at:
