As the part number indicates, ATE1-241 series TEC modules come with 241 pairs of Peltier elements. Peltier elements are the basic components of TEC module, which is also called Peltier module or thermo electronic cooler. TEC modules are designed for temperature regulation on target objects.
The maximum input voltage of this series TEC modules is 28.9V, with different power ratings and dimensions. The maximum temperature difference is 68°C, which can be achieved by single stage TEC module. If a higher temperature difference is needed, then two or more stages TEC modules should be utilized. All the TEC modules in this series are sealed version, which can prevent moisture from entering into the Peltier elements. Therefore, if the TEC modules are used in moisture temperature, the sealed version is highly recommended.
TEC modules can be controlled by our TEC controllers with high stability and high efficiency. Moreover, NTC thermistors can also work with our TEC modules for stable and accurate temperature sensing. Please visit this page for more information:
http://www.analogtechnologies.com/thermistor.html
http://www.analogtechnologies.com/tec-controller.html
ATI provides more standard TEC modules and thermal cycling TEC modules, for more technical data of TEC modules, please visit our webpage and datasheet:
http://www.analogtechnologies.com/tec-module.html
For more products of thermal system, please visit:
http://www.analogtechnologies.com/thermal_system_components.html
