This thermistor ATH10KBL2A is a replacement for ATH10KL2A. ATH10KBL2A series NTC thermistors consist of three versions, ATH10KBL2A, ATH10KBL2AT65 and ATH10KBL2AT65S. The latter two thermistors are based on ATH10KBL2A, with more features. ATH10KBL2A has two bare copper coated lead wires, and ATH10KBL2AT65 has the two lead wires covered with high temperature plastic tubing, and the ATH10KBL2AT65S is the sealed version of ATH10KBL2AT65. Sealed thermistors can be used in non-corrosive liquid for temperature measurement.
ATH10KBL2A series NTC thermistors are glass encapsulated thermsitors packaged in an extra small ring lug, which is convenient for mounting and fixing. The length of the ring lug is 8.1mm, and the width is 3.6mm. The length of the lead wire is 65mm. These NTC thermistors come with long term stability and reliability. The resistance accuracy is 1%. As indicated in the part number, ATH10KBL2A, the nominal resistance at 25°C is 10k.
NTC thermistor can work with TEC module and heat sink in order to measure and control temperature in some systems.
For technical data of this NTC thermistor series, please refer to:
http://www.analogtechnologies.com/ath10kbl2a.html
For more types of low drift NTC thermistors, please visit:
http://www.analogtechnologies.com/thermistor.html
For more and various types of electronic products, please visit our homepage at:
