Laser diode driver is usually used to drive laser diode. ATLS10A216 is a high voltage and constant current laser driver. This laser driver features compact size, fully shielded, low output current noise, wide input and output voltage range, high efficiency, etc. The laser driver ATLS10A216 comes with a high input voltage range, from 5.5V to 15V, and the output voltage range is also wide, from 0.8V to 15V. Therefore, this laser driver can drive one or multiple laser diodes at the same time. The m...(more)
Traditional ntc thermistors are epoxy encapsulated or glass encapsulated. The latter one is better than the former one in performance. However, in many applications of ntc thermistors, it is not easy to mount the thermistors. Therefore, ATI provides a simple resolution for this: mount a metal ring lug outside the glass encapsulated ntc thermistor, which simplified the mounting process of the ntc thermistors. This ntc thermistor assembly ATH10KL2B is the updated version of ATH10K1R25, which is wi...(more)
ATE1-71 series thermoelectric coolers are popular in the market worldwide. The TEC module features a compact size and no moving parts. There are 71 pairs of Peltier elements inside the two ceramic surfaces. More Peltier elements, larger input voltage. The input voltage of this series TEC modules is 8.5V. This TEC module comes with two ceramic plates and two insulated lead wires of different colors. The red wire is the positive one, and the black the negative one. TEC modules can bear orthogonal...(more)
ATE1-63 series thermoelectric coolers have 63 pairs of Peltier elements with a maximum input voltage of 8V. This series TEC modules are designed for heating up and cooling down objects in a wide temperature range, up to 200C. TEC modules can be applied in solid state lasers, optical components, bio-tech testing benches, etc. There are several options for the maximum current, from 1.9A to 6A, which results in different power ratings. The maximum temperature difference can be 63C, 67C, or 74.5C. I...(more)
ATE1-49 is a series of TEC modules with a maximum input voltage of 5.9V and 49 pairs of Peltier elements. They are designed to regulate the temperature for target objects and stabilize the temperature in a wide temperature range. TEC modules are applied in more and more fields since there are no moving parts in it and the size is also compact. There are several options for maximum current allowed to pass through the TEC module, from 1A to 6A, resulting in different power ratings. There are also...(more)
ATLS250MA106 is one of laser diode driver designed and manufactured in Analog Technologies, Inc. This laser driver comes with low output noise and high output current absolute accuracy. It can be used for driving laser diodes, such as DPSSL, EDFA, SOA, fiber laser, etc. This laser diode driver has a maximum output current of 250mA with low noise. The noise value is 4.5VP-P at 0.1Hz to 10Hz. This output current can be linearly set by an input voltage, or modulated by an external signal of up to 1...(more)
ATH10K1R25 is a glass encapsulated negative temperature coefficient thermistor, which comes with high performance, high precision, and high stability. This ntc thermistor has a compact size with the diameter of the thermistor head 1.25mm, as shown in the photo below. The nominal resistance @ 25C is 10k. There are two lead wires with the length of 70mm. For the type of the lead wires, we have three versions: one is bare leads; the second one has the leads covered with plastic tubing, which preven...(more)
NTC thermistor is short for negative temperature coefficient thermistor, the resistance of which decreases when the temperature rises. NTC thermistor has been widely applied in many fields, such as electronic thermometer, air conditioner, or automobile temperature measurement and monitor circuit. ATH100KR8 is a typical NTC thermistor manufactured by ATI, which provides various types of NTC thermistors. As shown in the part number, ATH100KR8, we can see that the nominal resistance at 25C is 100k,...(more)
