Long life TEC modules refer to those that are designed for thermal cycling applications, i.e. frequent changes between heating up and cooling down. It is not practical for standard TEC modules since the life time will be largely reduced. This long life TEC module has much longer operational life than standard TEC in terms of thermal cycling application, thus it can be also called thermal cycling TEC module. This thermal cycling TEC module comes with a maximum input voltage of 9V. There are two m...(more)
TEC module is also called thermoelectric cooler that is used to cool down or heat up objects. Long life TEC modules refer to those TECs that can be used in thermal cycling application, such as PCR devices, thermal cyclers, chillers and analyzers, thus they are also called thermal cycling TEC modules. The ATE1-TC-70-15AS TEC module comes with 70 pairs of Peltier elements and a maximum input voltage of 9.6V. The maximum current of this TEC module is 15A. The maximum temperature difference that thi...(more)
SMD inductors, resistors and capacitors are widely used in electronic products nowadays due to the stable performance and small sizes. This article introduces a inductor container that stores SMD inductors of different sizes and values. The container is an enclosure with more than 100 lidded compartments inside and a final top cover that can close the whole enclosure, as shown in the picture below. Moreover, there is a foam pad inside the top cover, which is used to keep all the lids of the comp...(more)
ATLSXA202D series laser diode drivers are designed to drive laser diodes with high efficiency, more than 90%. This laser diode driver can output constant current and there are multiple options for the maximum output current, 500mA, 1A, 2A, 3A, 4A or 6A. This laser diode drive feature frequency synchronization function, which allows the laser driver using an external digital signal (within the range from 520kHz to 800kHz) to synchronize the internal PWM output stage of this laser driver, thus eli...(more)
TEC Controller is also called Peltier controller, which is used for driving Peltier coolers in order to regulate the object temperature. This Peltier controller TECA1-xV-xV-DAH is one of ATIs TEC controllers, which has high accuracy and high stability. This TEC controller comes with high efficiency, higher than 90%. The stability is as high as 0.004C. It has a higher accuracy compared with our current TEC controller, TECA1-xV-xV-D. The main difference lies in the maximum voltage difference betwe...(more)
TEC Controller is also called Peltier controller, which is used for driving Peltier coolers in order to regulate the object temperature. This Peltier controller TECA1-xV-xV-DAH is one of ATIs TEC controllers, which has high accuracy and high stability. This TEC controller comes with high efficiency, higher than 90%. The stability is as high as 0.004C. It has a higher accuracy compared with our current TEC controller, TECA1-xV-xV-D. The main difference lies in the maximum voltage difference betwe...(more)
ATH100KL2C series is special thermistor assembly that is widely used in temperature sensing applications. The thermistor head inside the ring lug is a glass encapsulated ntc thermistor, the resistance of which changes with the temperature. This thermistor assembly comes with a wide temperature range, i.e. from 40C to 270C. The ring lug is easy for mounting. The nominal resistance of this thermistor assembly is the same as ATH100K1R25, 100k and the accuracy is 1%. The diameter of the ring lug hol...(more)
Ntc thermistors have been widely used in temperature sensing applications these days. ATH100KL2B is an ntc thermistor assembly that has a glass encapsulated ntc thermistor inside the ring lug. The ring lug is used for mounting to another object easily. The internal glass encapsulated thermistor is ATH100K1R25, with the nominal resistance at 25C of 100k. The ring lug outside it has a ring hole diameter of 2.18mm. If you are looking for a larger ring hole diameter, then ATH100KL2C may meet the req...(more)
