TEC is the abbreviation of thermal electric cooler , which is used to heat and cool in temperature cycling applications, including instrumentation, PCR devices, thermal cyclers, chillers and analyzers, etc. In order to drive TECs to stabilize the temperature, the Peltier controller is designed by our company ( ATI ). And there are many types of Peltier controllers with high quality, high efficiency and high reliability. Figure 1. The physical photo of the TEC5V6A-D Peltier controller The TEC5V6A...(more)
The Peltier controller is an electric module, which is designed to drive t hermal electric coolers ( TECs ) by ATI . The Peltiercontroller is packaged in a metal enclosure to keep from the inferences between the controller and other electronics. And it has a compact size so that it is very convenient to use, carry and store. During operation, the controller can reach high efficiency, high stability and high reliability. Figure 1 is the physical photo of the Peltier controller. Figure 1. The phot...(more)
The ATEC24V10A-DPeltier controller is an electric module with high output voltage 24V and high output current 10A. This Peltier controller is used to drive high powerthermal electric coolers ( TECs ) to achieve high temperature stability.During operation, the Peltier controller features high efficiency (more than 98%) and high temperature stability (-0.01C). Figure 1 is the physical photo of the ATEC24V10A-D Peltier controller. Figure 1. The photo of an ATEC24V10A-D Peltier controller Bu usingth...(more)
The ATEC24V10A-D is an electric module, which is used to drive thermal electric coolers (TECs) with high temperature stability. The Peltier controller has a wide voltage range from 5V to 25V, and the voltage signal, the set-point temperature and the output current limit can be set. Besides DIP package, it also provides SMT package for users. As it has a compact size (see Figure 1), it is very convenient to use, carry and storage. Figure 1. The photo of the ATEC24V10A-DPeltiercontroller In order...(more)
ATH10K1R0 is a glass encapsulated NTC thermistor . It can be widely used in temperature measurement and control system, where high temperature sensitivity, long term stability, and high temperature sensing are required. Compared with traditional epoxy encapsulated NTC thermistors, ATH10K1R0 comes with smaller size (: 1.0mm1.4mm), quicker response time (4s in still air), better long term stability (0.1C/Y), and wider temperature range (-55C to 250C). The two leads of this thermistor is covered wi...(more)
ATW3A314 is a kind of energy saving Peltier controller , which is designed to drive thermal electric coolers ( TECs ) and regulate the temperature. This Peltier controller features thatit can save energy a lot by using battery power supply. And the controller is packaged in a metal enclosure, so it can block the interferences from other electronics. The following is the photo of the ATW3A314Peltier controller. Figure 1. Physical photo of the ATW3A314 Peltier controller Through the ATW3A314, it i...(more)
ATI provides an easy solution for electronic designers in collecting and organizing surface mount inductors, that is SMT Inductor Kits . There aredifferent types of inductor kits that contain different inductors of commonly used values with different quantities. The inductor kits are easy for users toobtain any value of inductors in the shortest time with the highest efficiency. The inductor kits come with128 individual compartments, each of whichcontains a certain amount of inductors of a certa...(more)
Thermal electric coolers ( TECs ) play an important role in thermal cycling applications, including instrumentation, PCR devices, thermal cyclers, etc. TEC can both heat and cool, depending on the current direction. In order to make TEC regulate temperature more stably and reliably, the Peltier controller is designed and released by our company ( ATI ). Figure 1. The physical photo of a Peltier controller There are many kinds of Peltier controllers in our company, which feature compact size, hig...(more)
