The ATH10KR8B is a series of high precision glass encapsulated ntc thermistor . The ATH10KR8B series ntc thermistor come with three versions, ATH10KR8B, ATH10KR8BT65 and ATH10KR8BT65S. The ATH10KR8B has two bear leads coated with copper; the ATH10KR8BT65S has the two leads covered with high temperature plastic tubing and sealed by epoxy, while the ATH10KR8BT65 is the non-sealed version with plastic tubing. They can work under up to 140C temperature and the latter is of liquid resistant. Comparin...(more)
TEC5V6A-D is a Peltier controller withhigh stability and high precision, which is utilized to drive thermal electric coolers (TECs). As shown in Figure 1, the Peltier controller is packaged in a metal enclosure so that it can block the incoming and outgoing interferences between the controller and other electronics. And the peltier controller has a compact size, which is easyfor using, carrying and storing. Figure 1. The photo of a TEC5V6A-D Peltier controller The TEC5V6A-D Petier controller pro...(more)
An ntc thermistor should come with short term and long term drifts in the resistance temperature relationship. A number of high stability low drift NTC thermistors are provided in Analog Technologies. ATH10KL2A is a typical ntc capped thermistor. The ATH10KL2A is a capped ntc thermistor with a thermistor head packaged in a small ring lug. This thermistor head is the same as ATH10KR8, so the characteristics of both of ntc thermistors are similar. ATH10KR8 is a glass encapsulated ntc thermistor. T...(more)
ATW3A314D is a Peltier controller , which is designed and released by ATI . TheATW3A314DPeltier controller can be used to drive thermal electric cooler ( TEC ). During operation, it has high efficiency (more than 90%), high stability and high reliability. Figure 1 is the photo of the ATW3A314D Peltier controller. Figure 1. The photo of the ATW3A314D Peltier controller By using the ATW3A314D Peltier controller, users can set the desiredtemperature. When the object temperature is within the pre-se...(more)
Low drift is a good characteristic of ntc thermistor, which helps improve the precision in temperature measurement and control in many related applications. Moreover, a high performance ntc thermistor should have low short term and long term drifts in the resistance temperature relationship. ATI provides some high stability low drift mini NTC thermistors . ATH10KL2B is a typical ntc thermistor assembly. The ATH10KL2B comes with a glass encapsulated thermistor packaged in a compact ring lug. ATH1...(more)
TEC is the abbreviation of thermal electric cooler, which can both heat and cool based on Peltier effect. By using TEC, the thermal load temperature can be stabilized in a short time. It has become more and more popular in electronic field because it has no moving parts, no wearing, and a long service time, etc. In order to drive TEC to stabilize temperature, a Peltier controller has been designed by ATI . The photo of a Peltier controller is shown in Figure 1. By usingPeltier controller, users...(more)
Peltier controller is an electronic module, which is used to drive thermal electric coolers ( TECs ). By using a Peltier controller, users can set the desired temperature and the maximum voltage across TEC. And the Peltier controller can also monitor and regulate the temperaturein real time. During operation, the controller has many advantages such as high efficiency, high stability and high reliability. In addition, the Peltier controller is packaged in a metal enclosure (see Figure 1), which c...(more)
Temperature drift is also called zero drift, which refers to the variation of the parameters of semiconductor device caused by temperature change. A high performance NTC thermistors should come with low short term and long term drifts in the R-T relationship, the resistance vs. the temperature, which will achieve high system performance. The ATH10KL2C is an NTC thermistor assembly with a glass encapsulated thermistor in a compact ring lug. Comparing with conventional epoxy encapsulated thermisto...(more)
