Laser diode driver ATLS250MA106 is designed for driver diode lasers with ultra low noise current, up to 250mA. The main feature of this laser driver is the low noise, 100nA, at 0.1 Hz to 100 kHz RMS. The output current absolute accuracy is very high, 0.1%, and the output current stability is also high, 100ppm/C. When this laser driver is powered by a 5V power supply, the output voltage is 1.5V to 4V. There is a temperature compensation network inside the laser driver, which can maintain the outp...(more)
Peltier controller TECA1-xV-xV-D is a TEC controller with high efficiency and high stability. The efficiency is more than 90% and the stability is 0.01C. This Peltier controller comes with a maximum output current of 2.5A. The maximum output voltage is 0V ~ (VPS 0.2V). The input voltage can be 3.1V ~ 3.5V or 4.75V ~ 5.25V. This TEC controller has a wide operating temperature range, from 40C to 85C. This Peltier controller has many functions, such as temperature measurement and monitoring, temper...(more)
Peltier controller TECA1-xV-xV-DAH is the updated version for the TEC controller TECA1-xV-xV-D . This Peltier controller has a higher precision, as shown in the table below. The TEC controller is also called Peltier controller, which is used for driving thermoelectric coolers in regulating temperatures in temperature control and measurement system. Part # Maximum |V TEMP V TEMPSP | (mV) TECA1-xV-xV-DAH 0.5 TECA1-xV-xV-D 25 This Peltier controller comes with a compact size, which saves much space...(more)
ATLS200MA103 is a laser driver in 103 laser driver series, with the maximum low noise output current of 200mA. The noise is ultra low, 2.5VP-P at 0.1Hz to 10Hz. When this laser driver is powered by a 5V power supply, it will output a voltage range from 1.5V to 4V. The output current of this laser driver can be set by an input voltage linearly or modulated by an external signal of up to 2MHz in bandwidth, which results in a minimum 1S rise and fall time at the output current. There is a low noise...(more)
Diode laser driver is designed for driving diode lasers. ATLS100MA103 is a low noise laser driver, which is a part of 103 laser driver series. This laser driver outputs a maximum current of 100mA with low noise. There are more current options in this series, such as 200mA, 250mA, 500mA and 1A, and the corresponding products are ATLS200MA103, ATLS250MA103, ATLS500MA103, and ATLS1A103. The output noise is as low as 1.5VP-P @0.1Hz to 10Hz. There is a high absolute accuracy, 0.1%. The power supply v...(more)
ATLS6A214D is a high voltage laser diode driver with wide input voltage range and high output current. This laser driver is one of 214 series laser diode drivers, which can drive high voltage laser driver or multiple laser drivers at the same time. This laser driver outputs up to 6A current, which is different with other laser drivers in this series, such as ATLS4A214D and ATLS8A214D . All the laser drivers in this series come with the same power supply range, from 5V to 14V. The efficiency of t...(more)
ATLS4A214D is the diode laser driver in the high output current and input voltage laser driver 214 series, which are designed to drive one or more diode lasers simultaneously with up to 4A well controlled output current at high efficiency of 90%. High efficiency makes the laser driver generate small amount of heat, which needs no heat sinks during normal operation. In this series, there are other two laser drivers, i.e. ATLS6A214D and ATLS8A214D . These two laser drivers come with different maxi...(more)
ATLS3A212D is the one in high voltage laser driver series, with the largest maximum output current, 3A. Same to other high voltage laser drivers in this series, the input (power supply) voltage range is from 4.5V to 16V. When powered by a 15V supply, this laser driver can output a maximum voltage of 14V. There are more options for maximum output current, i.e. ATLS500mA212D , ATLS1A212D , and ATLS2A212D . This high voltage diode laser driver is designed to meet the urgent requirements for driving...(more)
